- Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.
- Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.
Kyoritsu 8115 Clamp Sensor/adaptor
Measuring range | AC 0.1 – 130Arms (185Apeak) | DC 0 – ±180A |
Output voltage | AC 10mV/A | DC 10mV/A |
Accuracy | ±1.2%rdg±0.4mV (50/60Hz) ±2.5%rdg±0.4mV (40 – 1kHz) |
±1.2%rdg±0.4mV (*) |
Low battery warning | 2.2V±0.2V or less – Red LED flash (1.9V±0.2V – Automatically power off) |
Conductor size | Max. Ø12mm |
Withstand voltage | AC 3540V (RMS 50/60Hz) for 5 sec. |
Operating temperature & humidity range | -10 to 55ºC, relative humidity 85% or less (no condensation) |
Output impedance | Approx. 10Ω or less |
Applicable standards | IEC 61010-1 CAT III 300V Pollution degree 2, IEC 61010-2-032, IEC 61326-1 |
Power source | DC3V (size AAA alkaline battery LR03×2pcs) * Continuous use: approx. 40 hours (Auto power off: approx. 20 minutes) |
Cord length | Approx. 1,200mm |
Output connector | Φ4mm banana plug |
Dimensions | 127(L)×42(W)×22(D) mm |
Weight | Approx. 140g |
Accessories | Soft case, LR03×2, Instruction manual |